Company profile
Contact details
Powder corrosion transformer Foliox PCT-F (further PCT-F) highly active anti-corrosive filler based on vegetable raw is a complex of natural macropolymers with branched structure and a wide range of functional groups, as well as extractive organic substances, among which most are aliphatic acids and aldehydes, tanninproizvodnye, nitrogen and sulfur compounds. The main purpose of Folioks PCT-F - use as a functional additive in the manufacture of soil-rust converters. Recommended for use in formulations of primers based on various film-forming substances (bituminous, oil, butyric, glyphtalic, pentaphtalic, phenolic, epoxy, polyvinylacetate, perchlorvinyl , in liakrilatnyh, based on copolymers of vinyl chloride, polyurethane, silicone as well as ising is the use of Folioks PCT-F in the manu ...facture of lubricants conservation, temporary protective coatings and packaging materials Folioks PCT-F contributes to slow and stop the corrosion processes, preventing their development over the life of the coating (localize the active centers in cases of mechanical damage). Provides high adhesion coatings compositions applied to the surface prokorrodirovavshie ferrous metals with a layer of rust to 150 microns In combination with conventional anti-corrosion pigments and inhibitors used in the manufacture of priming materials Folioks PCT-F contributes to the appearance of synergy, leading to a high protective effect by increasing the efficiency of mixtures.The fundamental difference between trade marks Folioks PCT-F is contained in the applicable commodity product and the recipe - factors affecting the reaction activity of the anism of protective effect of soils of rust converters manufactured using
Folioks PCT-F is a complex physical and chemical process of interaction of their member component from corrosion products and direct metallic tive components of the soil, rust converter, interacting with the oxides of iron, transforming them into insoluble and inactive in the corrosion on the connection. Containing tional container in Folioks PCT-F tanninproizvodnye products enable the formation of chelate complexes, binds the particles of rust between themselves and the metal (with fatty acids contribute to the reaction, partially dissolving hydrated oxides of iron). In the presence of a film maker chelate complexes acquire additional strength,elasticity and permeability in relation to the corrozionno - active agents (possessing low values of diffusion coefficients, permeability and solubility for water, gas and electrolyte solutions). The overall protective effect of reinforcing participating in the ongoing process of corrosion inhibitors of mixed action, which inhibit the rate of both anodic and cathodic reactions due to the formation of chemisorption on the metal surface layer.The net result of the process described above is to change the nature of the surface of the metal and the formation of coatings with high protective properties of the complex For protective coatings, obtained with the use of paint composition, modified bathrooms Folioks PCT-F, characteristic increase adhesive strength during the initial operating costs of the former. This is manifested by the fact that the process of phase transformations of corrosion products under the film runs for a long time after drying primer. Read more
Folioks PCT-F is a complex physical and chemical process of interaction of their member component from corrosion products and direct metallic tive components of the soil, rust converter, interacting with the oxides of iron, transforming them into insoluble and inactive in the corrosion on the connection. Containing tional container in Folioks PCT-F tanninproizvodnye products enable the formation of chelate complexes, binds the particles of rust between themselves and the metal (with fatty acids contribute to the reaction, partially dissolving hydrated oxides of iron). In the presence of a film maker chelate complexes acquire additional strength,elasticity and permeability in relation to the corrozionno - active agents (possessing low values of diffusion coefficients, permeability and solubility for water, gas and electrolyte solutions). The overall protective effect of reinforcing participating in the ongoing process of corrosion inhibitors of mixed action, which inhibit the rate of both anodic and cathodic reactions due to the formation of chemisorption on the metal surface layer.The net result of the process described above is to change the nature of the surface of the metal and the formation of coatings with high protective properties of the complex For protective coatings, obtained with the use of paint composition, modified bathrooms Folioks PCT-F, characteristic increase adhesive strength during the initial operating costs of the former. This is manifested by the fact that the process of phase transformations of corrosion products under the film runs for a long time after drying primer. Read more
Type of Paints
- Other Paints
- Primers
- Enamel Paints
- Varnish
- Lacquers
- Inks
Supplier Category
- Exporter of Paints
- Manufacturer of Paints
Category of paints
- Indoor Paints
- Outdoor Paints
- Industrial Paints
Other Products
- Other Supplier Products
- Pigments
- Chemicals