Pera Exterior Surface Smoothing Putty
General product information
DESCRIPTION:PERA EXTERIOR SURFACE SMOOTHING PUTTY, is an acrylic copolimer emulsion based putty.
APPLICATION:
Any dirt, dust or rust should be removed from the surface. Before applying on the limed surface, the surface must be cleaned completely or should be used PERAZOL ISOLATION PRIMER. If ıt would be used on the surfaces which were painted before, you should not add cement into PERA EXTERIOR SURFACE SMOOTHING PUTTY. For the surfaces to be painted first, add to the PERA EXTERIOR SURFACE SMOOTHING PUTTY 20 % white and grey cement with water and mix it till it becomes thick. After all you may apply it by the means of trowel. It should be applied above 5 o C. Apply two coats and wait 24 hours between the coats. On one coat care not to exceed 3 mm thickness.